Blackmagic Design MultiView 16

Ketersediaan: Tersedia
tidak ada:


  • 16x 6G-SDI Inputs dengan Loop Outputs
  • 4x SDI dan 1x HDMI MultiView Outputs
  • Supports SD, HD, Ultra HD 4K, DCI 4K
  • 2x2, 3x3, 4x4 Multi-View Configurations
  • Built-In LCD dengan Spin Knob Control
  • Push Buttons pada Front Panel
  • Ethernet untuk Remote Control
  • 1RU Machined Aluminum Chassis
  • Built-In Multi-Voltage Power Supply

Multiview 16 from Blackmagic Design is a rack-mounted multiviewer processor that has 16 of 10-bit 6G-SDI inputs that allow you to monitor SD, HD, or 4K sources on the Ultra HD monitors or TVs. This device has the capability to give 4, 9, or 19 views to be selected, with each input in fully re-synchronized. In short, this unit is perfect for the usage in the broadcast truck, studio, or even on the location.

For connectivities, Multiview 16 has 2 HD-SDI, 2 6G-SDI, and one HDMI multi-view outputs as well as the loop output for each 6G-SDI input to distribute the signals to any additional devices. On the front panel, there are useful controls and features: built-in LCD with spin knob, push buttons and other features. For remote-based control, there is the Ethernet port on the rear part. For easy charging, there is the built-in multi-voltage power supply that supports 90 to 240VAC with the IEC power cable.

Multiview 16 offers a good solution for you who deal with plenty video feeds to monitor with the limited space. With this device, there will be no more the difficulties to connect plenty monitors, cables or extra power. By simply plug into cameras, switchers, decks, and routers towards the SDI connections; you can have the best clarity and detail in the single Ultra HD display.

With the native operation in the Ultra HD, Multiview 16 gives 4 times better for the pixels in each view, as such the video has clearer and sharper display. From the construction, this device is made from metal with a modern, and elegant design.

Informasi lebih lanjut
SDI Video Input 16 x 10-bit SD-SDI, HD-SDI and 6G-SDI.
SDI Video Loop Output 16 x 10-bit SD-SDI, HD-SDI and 6G-SDI.
Multi View Outputs 4 x SDI plus 1 x HDMI (2 x HD, 2 x 6G-SDI, 1 x HDMI), able to be used concurrently.
SDI Video Multi View Outputs 2 x 10-bit HD-SDI, 2 x 10 bit 6G-SDI.
HDMI Video Multi View Outputs 1 x HDMI type A connector. Output supports EDID of the monitor.
Reference Input Black burst and Tri-level Sync for SD, HD and 4K.
Multi Rate Support Auto detection of SD, HD or 6G-SDI. Simultaneous viewing of 4K, HD and SD video.
Updates USB or Ethernet.
Control 16 buttons for local control of MultiView 16. 5 buttons and scroll wheel for control of LCD display or RJ45 Ethernet.
Configuration Via front panel LCD or use either RJ45 Ethernet or USB 2.0 for firmware updates and IP address setting.
RS-422 Control 1 x input for configuring layouts.
Reclocking On all SDI outputs, auto switching between standard definition, high definition or 6G-SDI video.
SD Format Support 525i29.97 NTSC, 625i25 PAL.
HD Format Support 720p50, 59.94, 60.
1080p23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
1080PsF23.98, 24, 25, 29.97, 30.
1080i50, 59.94, 60
2K Format Support 1080p23.98, 24, 25, 1080PsF23.98, 24, 25
Ultra HD Format Support 2160p23.98, 24, 25, 29.97, 30
4K Format Support 2160p24
SDI Compliance SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 310M, SMPTE 425M-B, ITU-R BT.656 and ITU-R BT.601.
SDI Video Rates SDI video inputs are switchable between standard definition, high definition and 4K. SDI switches between 270 Mb/s standard definition SDI, 1.5 Gb/s HD-SDI, 3G-SDI and 6G-SDI.
SDI Video Sampling 4:2:2 and 4:4:4.
SDI Audio Sampling Television standard sample rate of 48kHz and 24-bit.
SDI Color Precision 10-bit 4:2:2 and 4:4:4.
SDI Color Space YUV or RGB for inputs, YUV for outputs.
SDI Auto Switching Automatically selects between SD-SDI, HD-SDI, and 6G-SDI on each input so that each input can be running a different television standard.
SDI Metadata Support Video payload identification ancillary data as per SMPTE 352M.
Display Built-in 1.5” LCD for menu settings.
Software Control Multi view software included free for Windows™ and Mac OS X™.
Internal Software Upgrade Via included updater application.
Operating Systems Mac OS X 10.10 Yosemite.
Mac OS X 10.11 El Capitan or later.
Windows 8.1 or Windows 10.
Power Fail Protection MultiView 16 settings preserved and restored instantly at power on.
Power Supply IEC power cable required. 90 - 240V AC input.
Power Consumption 45 Watts
Operating temperature 0° to 40° C (32° to 104° F)
Storage temperature -20° to 45° C (-4° to 113° F)
Relative Humidity 0% to 90% non-condensing
Warranty 12 month Limited Manufacturer's Warranty.
Tulis Ulasan Anda Sendiri
Anda sedang mengulas:Blackmagic Design MultiView 16
Customer Questions
No Questions
Please, mind that only logged in users can submit questions